VLB 174
H0003
There were no errors detected in any of
the loaded files.

H0004
 There are no more matches of the
 specified string in this file.

 The cursor location remains unchanged.

H0006
 VLB scanned the document from the current
 cursor location to the end of the
 the document and could not find the
 specified target text. The cursor
 remains at the same location.
H0007

VLB tried repeatedly to send text to the
printer but did not get any response.

Make sure that there is a printer
attached to LPT1. The printer must have
paper loaded and must be online.

If you are attempting to print to a
network printer, check with your network
administrator.
H0008
           Printing complete

The text was sent to the printer and the
printer has acknowledged receipt.

H0009

VLB attempted to save data to a file but
was denied access.

You may have specified an invalid file
name or may be attempting to save to a
disk that does not exist.

If you are saving to a diskette, ensure
that a formatted diskette is in the
drive and that the drive door is closed.

If you are on a network and are saving
to a network drive, check with your
LAN administrator to ensure you have
WRITE access to the specified directory.

If you are saving the table of contents,
keyword index, help file or registration
form, choose Save As.

H0010
          File not found

VLB tried to load the file you requested
but could not find it in the directory
you typed.

Check that the file exists and that you
have identified the correct drive/path
and filename.

If you are loading from a diskette, make
sure that a formatted diskette is in the
drive and that the drive door is closed.

If you are on a network and are loading
from a network drive, check with your
network administrator to ensure you have
READ access to the specified directory.

H00011
    Error writing file.

VLB attempted to write data to the disk
file was unable to do so.

You may have specified an invalid
directory name or may be attempting to
write to a disk that does not exist.

If you are saving to a diskette, ensure
that a formatted diskette is in the
drive and that the drive door is closed.

If you are on a network and are saving
to a network drive, check with the net-
work administrator to ensure you have
WRITE access to the specified directory.

H0012
           Printing cancelled

You told VLB to stop send text to the
printer.

H0014
           Insufficient disk

VLB has detected that there is insuffic-
ient room on your disk drives for the
creation of temporary work files and
backup files.

Exit the program and correct the problem
before proceeding.

Delete some files to increase the amount
of available storage.

Make sure you are running from a hard
disk or network drive with a minimum of
1 MB (1,000,000 bytes) free. A minimum
of 5 MB free is recommended.

Make sure that your TEMP environment
variable has been set. If necessary
run INSTALL.

H0016
VLB could not find one of the Vision
Links program files that it needs to
build the project.

Check to make sure that the programs
VLBMAKE.EXE and VLBINDEX.EXE exist in
the VLB program directory.

Check to ensure that VLB can find the
files. To find the files, at least one
of the following conditions must exist:
   . The VLB program directory is included
     in your DOS PATH.
   . The DOS environment variable VLB has
     been set to indicate the directory
     containing the VLB programs
   . VLB exists in the current paths for
     one of the available disk drives.

If you are running VLB from a diskette,
make sure the VLB program diskette is
in the drive and that the drive door
is closed.

For best results, the TEMP environment
variable should be set to point to a
valid directory where temporary work
files can be placed.

H0015
         No matches found

There no matches to the specified search
string.

H0019
     No text has been selected

You must select (highlight) some text
before you can perform the operation
you have requested.

To select text, hold down the shift
key while pressing one of the cursor
movement keys. If you have a mouse
you can select text by holding down
the left mouse button while moving
the mouse.

H020

You are attempting to split a link
across two lines. Any text surrounded
by the link indicators (98 and ) must
remain on a single line.

H021

You are attempting to split a keyword
phrase across two lines. Text surrounded
by the keyword indicators (≤ and ≥) must
remain on a single line.

H022

You are attempting to define a keyword
phrase across two or more lines. A keyword
phrase can occupy only a single line.

H023

The highlighted text already contains the
keyword phrase indicators (≤ and ≥). You
cannot define multiple keywords within the
same phrase.

Either remove the existing keywords or
select some other keyword text.

H024
     Multiple line links not allowed

You are attempting to define a hypertext
link from a phrase that occupies two or
more lines. A linked phrase can occupy
only a single line.

H025
        Link not found

VLB cannot find the line that is
referenced by this hypertext link.
Possible causes, and their remedies are:

 . You have deleted the line referenced by
   the link. Delete the link by placing the
   cursor on the link start indicator (0)
   and press delete.

 . The referenced line is no longer a
   heading. Return to the target line
   and specify it as a heading. If you
   have exited VLB since removing the
   heading attribute from the referenced
   line, it will be necessary to delete
   the hypertext link and recreate it.

 . The line exists in a file that is not
   currently loaded. Load the file into
   one of the view windows.

H026

       Link not defined

The text under the cursor contains no
links. Use LINK TO in the EDIT menu
to create a hypertext link.

The link indicators ( and ) indicate
the presence of a hypertext link.

If the text is surrounded by the link
indicators, but no link exists, you
should delete the link indicators and
create the link using the method
specified above.

H026

     Too many links on this line

A maximum of eight hypertext links can
be defined for a single line. Delete
one or more of the existing links
and try again.

H027

     Cannot link from this view

You cannot define a hypertext link from
text in the current view window. The
current view window contains read only
text such as the Table of Contents, the
Keyword Index or the ASCII character
table.

H0029

   Link previously defined.

The highlighted text already contains the
hypertext link indicators (0 and ). You
cannot define multiple hypertext links
within the same phrase.

Either remove the existing links by
indicator and pressing the delete key,
indicator and pressing the delete key,
or select some other text to link.

H0031
The view window you have requested does
not contain any data and will not be
displayed.

If the requested view window is the
table of contents, you must define
headings by choosing Define Heading
from the Edit menu.

If the requested view window is the
keyword index, you must define
keywords by choosing Define Keyword
from the Edit menu.

If the requested view window is the
ASCII character table (ASCII.CHR) or the
VLB online help manual, VLB cannot find
the file. Ensure that the file exists
in the VLB program directory and that at
least one of the following conditions
is true:

 . The VLB program directory is included
   in your DOS PATH.
 . The DOS environment variable VLB has
   been set to indicate the directory
   containing the VLB programs
 . VLB exists in the current path for
   one of the available disk drives.
H0106
The contents of the window have changed.

. Click on YES to save changes.
. Click on NO to lose any changes.
. Click on CANCEL to cancel the
  previous command.
H0107
Use the PROJECT INFORMATION popup to
specify the project title and the
information that will appear in the
Vision Links ABOUT screen that
is generated with your project.

┌Project Title ┐
│              │<- The project title.
└──────────────┘
┌─── ABOUT ────┐
│              │<- ABOUT your project
└──────────────┘
H0108
The MAKE OBJECT popup lets you specify
the object file name. Enter the target
file name into the filename window.
Select OK to proceed, CANCEL to
stop this operation.
H9042
Use the BUILD PROJECT popup to tell VLB
where and how to place the distribution
files.

┌──Main File───┐
│              │<- The path and name  
└──────────────┘   of the main table of
                   contents file.
┌─ID─┐
│    │          <- Optional unique 3  
└────┘             character project ID.

 [X] Verify     <- Check for errors
                   before building

 [X] Build Index<- Construct a full
                   text search index

 ( ) Automatic module breaks
     Let VLB choose the optimum method
     for breaking modules. This is the
     recommended method.

 ( ) Break on heading level
     Choose a heading level for breaking
     modules. When VLB encounters a
     heading with a value less than or
     equal to the value you specify, it
     will start a new module.

 NOTES: All distribution files will be
 placed into the same directory as the
 main file. This directory will then
 contain every file needed to run your
 Vision Links project. This includes:
  . All hypertext files
  . All VLR program and help files
  . All #INCLUDE program, graphic
    and text files.

 Use the unique project identifier
 if you are building more than one
 project into a single distribution
 directory.

H9044
       Feature not supported

 The shareware version of VLB does not
 support the integrated BUILD feature.
 You can still create an electronic book
 by creating an Object file and running
 vlbmake:
  1) Choose Make Object from the Build
      menu.
  2) Exit and run VLBMAKE

 Please register now to receive a license
 to use Vision Links. You will receive:
 -The latest release of VLB with the 
  integrated build function, indexer and
  distribution kit.
 -An unlimited VLR distribution license
 -One year free Technical Support
 -The complete VL electronic manual
 -Discounts on future releases

H9045
          Invalid break value

 You told VLB to break modules and spec-
 ified a value other than 1 through 8.

 Choose a value between 1 and 8 or use
 automatic module breaks.

H0401

        Unmatched link indicators

    The current line contains either
    the link start indicator (0)
    without the corresponding link
    end indicator () or it contains
    the link end indicator without the
    corresponding start indicator.

    Delete the unmatched link indicator.

H0402

      Unmatched keyword indicators

    Text that is surrounded by the
    characters ≤ and ≥ is considered
    to be a keyword phrase that will
    be included in the keyword index.

    The current line contains either
    the keyword start indicator (≤)
    without the corresponding keyword
    end indicator (≥) or it contains
    the end indicator without the
    corresponding start indicator.

    Delete the unmatched keyword
    indicator.

H0403

        Invalid link

VLB cannot find the line that is
referenced by this hypertext link.
Possible causes, and their remedies are:

 . You have deleted the line referenced by
   the link. Delete the link by placing the
   cursor on the link start indicator (0)
   and press delete.

 . The referenced line is no longer a
   heading. Return to the target line
   and specify it as a heading. If you
   have exited VLB since removing the
   heading attribute from the referenced
   line, it will be necessary to delete
   the hypertext link and recreate it.

 . The line exists in a file that is not
   currently loaded. Load the file into
   one of the view windows.

H0404

     Included file not found

VLB cannot find the file identified in
your #INCLUDE line.

Make sure that the file exists and that
you have specified the correct drive and
directory.

If the include file specifies a diskette
drive, make sure that the diskette is
in the drive and that the drive door is
closed.

If you are on a network, check with the
network administrator to ensure you have
the correct access privileges for the
specified directory.
H0405
      Module too long
The maximum module length for VLR is 
1024 lines. There are more than 1024
lines between the previous heading 
and this one. Module breaks occur on
heading lines so a module that is 
longer than 1024 lines will be gen-
erated. 

Define an additional heading between
this and the previous heading.
H0406
 Internal link identifier adjusted

When you define a line as a heading VLB
assigns a unique internal link identif-
ier so that it can become a link target.

The current line did not have a unique
value. This usually occurs when heading 
lines are copied or related files are 
not opened at the same time. 

The internal identifier for this line
has automatically been adjusted. How-
ever, any links to this line may be 
invalid and should be redefined. 
H0420
You do not have enough memory available
to build the project.

If you are able to do so, free more
base memory before running VLB. If you
are unable to free any additional memory
you can still build your project by
creating a Vision Links Object file:
 - Choose MAKE OBJECT from the BUILD
   MENU to create a Vision Links
   Object file.
 - Exit VLB and run VLBMAKE.
 - Run VLBINDEX to build the full text
   index. (VLBINDEX is not available
   in the unregistered version).

H1101

 Use to create a new document in another
 window.

 You can edit up to eight separate
 documents at a time. New will open
 another edit window and create an
 empty source document. All existing
 documents will remain unchanged.

H1102
 Use to load an existing file from disk.
 You can edit up to eight separate
 documents at a time. Open will load
 the file into a new window. Existing
 documents will remain unchanged.

 The disk file must be either a Vision
 Links Source Document or an ASCII
 text file.

H1103

   Use to load a file from disk and
   insert it into the current document
   at the current cursor location.

   The disk file must be either a
   Vision Links Source Document
   or an ASCII text file.

H1104
 Use Save to copy the contents of the
 document in the active window to disk.
 The document will remain in memory and
 the disk file will be overwritten

 If you have not already given the
 file a name, the Save function will
 ask you for a name. If the disk file
 already exists you will be asked if
 it should be overwritten.

H1105
 Use Save As to copy the contents of
 active view window to a disk file.
 The document will remain in memory.

 You can save
        . The current document
        . Selected text

 If you specify a name other than the
 name of the file from which the text
 was loaded and the file already exists
 you will be asked if you want to
 replace the existing file.

H1106
  Use Close to close the document in
  the active window and clear its
  memory.

  If you have modified the text, you
  will be asked if you want to save
  your changes.
H1107
 Use Close All to close all documents
 and clear memory in every view window.
 If you have modified any of the text
 you will be asked if you want to save
 your changes.
H1109
Use Print to generate a copy of text on
paper.

You can print
     . The current document
     . Selected text
H1110
Use to temporarily leave VLB so you can
use DOS. If you have made changes to any
of the loaded text you will be asked if
you want to save the modified files. VLB
will retain all of your files in memory
but saving your files prior to suspend-
ing VLB will reduce the risk of data
loss in the event of a system crash
caused by another program.

Type EXIT at any DOS prompt to return to
the Vision Links Builder.
H1112
Use Exit to leave the program when you
are finished using VLB.

If you have made changes to any of the
loaded text you will be asked if you
want to save the modified files.
H1201
 Use Cut to remove selected text from
 the active document and put it in the
 clipboard.

 You can then use Paste (shift+insert)
 to copy text from the clipboard into
 the view window.

 To select text: Hold the shift key
 while pressing an arrow key.
H1202
  Use Copy (or press Ctrl+C)  to copy
  selected text from the active document
  and put it in the clipboard.

  You can then use Paste (shift+insert)
  to copy text from the clipboard into
  the view window.
H1203
  Use Paste (or press Shift+Insert) to
  copy the contents of the Clipboard
  into the active window. The text will
  be inserted at the current cursor
  location.

  The contents of the clipboard will
  remain unchanged.
H1205
Use Find to look for a text string in
the active window. Find scans the
document from the current cursor
location to the end of the document.

You can specify a case sensitive match
or a whole word match.
H1206
 Use Find Again (or press Ctrl+G) to
 repeat the most recent Find command.

 Find Again scans the document from the
 current cursor location to the end of
 the document.

 You can also press F3 to find again.
H1207
Use to locate a text string and replace
it with another text string.

You can choose to review each occurrence
before applying the change, or you can
tell VLB to change all occurrences.
H1209
  Use to define the selected text as
  a keyword or keyword phrase.

  To select text, hold down the shift
  key while pressing the left or right
  arrow key.
H1210
 Use to create a hypertext link from
 the selected text to another part of
 the project.

 To use this function.
 . Select (highlight) some text
 . Choose Link to....
 . Place the cursor on one of the
   displayed lines and press enter.

 When a link has been created, VLB will
 surround the linked text with the link
 indicator characters (0 and ).

 Hints: You can only link to lines that
        have been defined as headings.
        To include a line in the list
        of available link targets, but
        exclude it from the final table
        of contents, define it as a
        level 9 heading.
H1211
             Define Heading

Use to identify a line as a heading or
as a potential hypertext link target.

The highest possible heading level is
level 1, followed by level 2, then 3
and so on to level 8.

Level 9 lines are not headings but are
potential link targets.

Level 0 lines are neither headings nor
potential link targets.

Level  Description
 1-8   Heading and potential link target
 9     potential link target only
 0     Normal text line.

All lines that have been identified as
a level 1 through level 8 heading will
be included in the final Vision Links
Reader table of contents that will be
included with your distribution files.

All heading lines (level 1 through 9)
will be included in the VLB internal
table of contents. You can include a
line in the list of potential link
targets, but exclude it from the final
table  of contents by defining it as a
level 9 heading.

H1301
Use to view the Vision Links Builder
internal table of contents. The table
of contents is made up of all lines
in all windows that have been defined
as headings.

Heading lines from window 1 will appear
first, followed by heading lines from
window 2, 3, 4 and so on...

Note: Although Level 9 headings will
      appear in the internal VLB table
      of contents, they will not be
      included in the generated VLR
      Hypertext Table Of Contents.
H1302
Use to view a list of all text that has
been identified as a keyword phrase.

The VLB keyword list will appear in the
same order as the text appears in the
source documents. When VLB Builds the
project it will automatically sort the
keyword index so that the keyword index
distributed with your electronic book
will appear in alphabetical order.
H1303
 Use to jump to the line referenced by
 the hypertext link under the cursor.

 To define a link, select text and
 choose Link To from the Edit menu.
H1304
Use to display an Ascii Character Table.

Hint: You can copy special characters
      from the Ascii Character Table
      into your document by selecting
      one or more characters and using
      Copy and Paste.
H1306
Use to display the document in window 1
H1307
Use to display the document in window 2
H1308
Use to display the document in window 3
H1309
Use to display the document in window 4
H1310
Use to display the document in window 5
H1311
Use to display the document in window 6.
H1312
Use to display the document in window 7
H1313
Use to display the document in window 8
H1401
Use verify to check for errors in all
documents in all windows. Verify scans
through the documents and checks for
the following conditions.

 - unmatched link indicators
 - unmatched keyword indicators
 - invalid hypertext links
 - missing include files
 - correct module length
H1402
 Use to specify the project title and
 the information that will appear in
 the Vision Links ABOUT screen that is
 generated with your project.
H1403

Use to create an object file that can
later be used as input for VLBMAKE.

Hint: Normally it is not necessary to
      use this function. However it
      can be useful if your computer
      returns insufficient memory
      errors when you attempt to
      run Build Project.

H1404

  Use to create a Vision Links
  Electronic Book or Information Base
  that is ready for distribution.

  Build project will:
  - generate all electronic text modules
  - generate the hypertext table of
    contents
  - generate the hypertext keyword index
  - generate a full text search index
  - include all required Vision Links
    Reader program and help files

H1502
   For help on a menu item, highlight
   the item and press F1.

   For help on any popup screen, press
   F1 while the popup is active or click
   on the Help button.

   To display detailed help choose Help
   from the Help menu or press F1 when
   the cursor is in the edit window.
H1501
     Use to display detailed help
H1503
 Displays information about the program.
H1505

 Use Registration to find out how to
 become a registered Vision Links Author.
 
 You are using the shareware version of
 the Vision Links Builder. This version
 does not include a license to distrib-
 ute your project. 
 
 You may use this software for a 30 day 
 evaluation period but may not distrib- 
 ute any projects to others. If you 
 continue to use the software you are 
 expected to register. As a registered
 user you will receive:
 
 -The latest release of VLB for DOS.
 -An unlimited VLR distribution license
 -One year free Technical Support
 -The complete electronic manual
 -Discounts on future releases

H0103
Use to select the name for saving the
current document or selected text.

File Name
    Type the path and file name.

( ) Active window
    Save the entire contents of the
    active window

( ) Selected text
    Save only the highlighted text
H1031

The file already exists on the disk in
the path you specified. Click on OK to
replace the or CANCEL to stop.

H0104
Use to print all or part of a document.

( ) All
    Print the entire contents of
    the active window.

( ) Selected text
    Print only the highlighted text

Choose the printer that best describes
your printer from the list.

( ) Generic
    Text only teletype printer

( ) Epson dot matrix
    Epson or epson compatible dot
    matrix printer

( ) IBM PPDS
    IBM dot matrix or laser printer

( ) HP Laserjet
    Hewlett Packard laserjet, deskjet or
    other HP compatible laser printer

( ) Postscript
    Printer that supports Adobe or
    compatible postscript.

H1911
       Maximum open files exceeded

  You asked VLB to create a new file or
  to load a new file into memory, but
  you already have eight files loaded.

  Close one or more open files and try
  again.
H2997
VLB found existing data in one or more 
disk swap files. This usually indicates
that either a system crash occured the
last time you ran VLB or another copy
of VLB is running.
   
  Choose YES to attempt recovery.
  Choose NO to reset the swap files.
  Choose CANCEL to exit VLB now.

NOTE: If you are using a multitasking
operating system such as Windows or OS/2
VLB may already be running. Choose
CANCEL to avoid corrupting SWAP files.
H99
  Error writing swap file.

VLB attempted to write data to the disk
swap file was unable to do so.

Check your TEMP environment variable to
ensure that it points to a valid drive
and directory. If you have not set your
TEMP environment variable, VLB has
attempted to use the current directory
for the swap file.

If you are on a network and are saving
to a network drive, check with the net-
work administrator to ensure you have
WRITE access to the specified directory.

If you are saving to a diskette, ensure
that a formatted diskette is in the
drive and that the drive door is closed.

H999
         Unexpected Error

 VLB encountered an unexpected error.

 You should write down the error
 number, save all files and exit the
 program. If the error continues to
 occur contact technical support.

H9999

